The story behind this build is pretty simple... i used to work on an old desk that i had from high school and it was time for a change.
The three reasons that i wanted a new workbench are:
- the height
- the top was not flat anymore
- the size of the work area
Materials that i've used for this build:
- 4cm x 4cm x 2mm x 6m rectangular profile (i've used almost two profiles)
- one sheet of 18mm osb (1,25m x 2.5m) - i haven't use it all for this build
- casters (two of them are locking casters)
Dimensions:
- height: 85 cm
- width : 100 cm
- length: 150 cm
I've started by cleaning the profiles, because they where covered with snow and ice and wipe them with a rag.
Next step was to cut the profiles but keept in mind the dimensions of the material so the cutting list is the following:
Metal parts:
4 pcs at 72.5 cm for the legs (casters height is 12.5 cm)
4 pcs at 92 cm
2 pcs at 142 cm
Osb:
1 pcs at 100x150 cm for the top.
The build video bellow:
Thanks for reading!
